Bulverde Families: How to Prepare Boats & Jet Skis for Off-Season Storage

Habib Ahsan
October 15th, 2025

As the summer adventures at Canyon Lake and nearby Texas waterways wind down, Bulverde families are preparing to store their boats and jet skis for the off-season. Proper storage isn’t just about parking your watercraft—it’s about protecting your investment from weather, corrosion, and mechanical wear. Here’s how to do it the right way.

1. Give Your Boat or Jet Ski a Deep Clean

Before storage, thoroughly wash your boat or jet ski to remove dirt, salt, and organic buildup. Use marine-safe soap and pay attention to hull crevices where grime and algae can linger. Once clean, let it fully dry to prevent mildew growth.

Pro Tip: Apply a fresh coat of wax to protect the paint and gel coat during months of inactivity.

2. Drain and Flush All Systems

Water left in the engine or bilge can freeze, corrode, or cause internal damage. Drain the bilge area, live wells, and water lines. For jet skis, run fresh water through the cooling system to flush out salt and debris.

Don’t forget to add fuel stabilizer and run the engine briefly to ensure treated fuel circulates throughout the system.

3. Protect the Engine and Battery

Change the oil and replace filters before storage—old oil can contain contaminants that harm the engine. Disconnect and remove the battery, storing it in a cool, dry place. Use a trickle charger to maintain its charge over the winter.

4. Cover and Secure Your Watercraft

Invest in a high-quality, weather-resistant cover that fits snugly. It prevents UV damage, dust accumulation, and pests. If possible, use covered or enclosed storage in Bulverde to protect against Texas’ unpredictable weather swings.

5. Choose the Right Storage Facility

For families near Canyon Lake, selecting a local storage facility with convenient access, surveillance, and covered options ensures peace of mind. Drive-up access and wide parking spaces make storing large boats and trailers hassle-free.

Tip: Covered storage keeps your vessel cooler, minimizing sun damage to seats and dashboards.

6. Inspect Before Storing

Check for any needed repairs or maintenance now—small issues can worsen when left unattended. Tighten loose fittings, inspect cables and hoses, and lubricate moving parts to prevent corrosion.

Final Thoughts

By taking these preventive steps, Bulverde families can ensure their boats and jet skis remain in top condition all winter long. When next season arrives, your watercraft will be ready to hit Canyon Lake without costly delays or repairs.